How To Reset Your Home Security System In Birmingham
A nice benefit of having your home security system hooked up professionally is that you rarely need to make major adjustments to it. However, there will likely be a couple situations when you must reset your alarms in Birmingham. If you’re utilizing a smart command hub, a reset normally takes a couple tap of a button when you’ve experienced a false alarm, power outage, or battery change.
Read The Instruction Manual Before Trying to Reset Your Alarm Panel
Here’s a simple yet valuable tip before you start resetting your Birmingham home security system, check your owner’s manual prior to proceeding. You don't want to undermine your home’s protection because you hit the wrong button. Also, your system could change if you upgraded from a numbered keypad to a fully digital system. If there’s ever a time when you can't reset your system, don't hesitate to call your trusted security specialists.
Resetting Your Birmingham Security System Due To A False Alarm
Typically, a false alarm occurs as a result of the accidental tripping of a sensor. You can use the central hub or access the ADT mobile app and touch the shield option and enter your unique passcode to turn off the system for these instances. You might receive notification from your security monitoring team, but simply inform them that you had a false alarm.
Resetting Your Alarm When Experiencing A Power Outage In Birmingham
If the power goes out due to high winds or other factors, you could begin hearing a repeated, high-pitched beep from your control panel. This signifies that the alarm is running off the battery backup. To reset your equipment and halt the steady beeps, you must deactivate and reactivate your system.
However, if you lose power for an extended time, you may need a total reset of your system. Pay careful attention to the directives in the manual -- usually by putting in your PIN number and pressing the off button twice -- and you should be back to normal. You could still hear chirps from the backup power, as it might not end until your battery reaches a full charge. Reach out to your home security specialists if you are still having problems with your ADT system a day after the power is resumed.
How To Reset Your Home Security System After Changing A Battery
On occasion you need to change a battery in one of your security devices. When this needs to be done, you want to switch your home’s defense to test mode so you avoid triggering an alarm by accident. After the new battery is put in place, move the alarm from "Test Mode" and restore normal operations. If the system fails to recognize the component or the battery light is still on, you could need a total reset of the system.
Tips to Reset Your Birmingham Security System When Adding Or Removing A Code
The addition and deletion of people can be done on your ADT Command hub and the ADT Control mobile app. You should never need a resetting of your system following the addition or deletion of a user or code. But you should note, if you move into a new property already equipped with an ADT security system, you'll want to call your home security professional at (205) 203-0526 to set up a new service. The installer will go on site to switch out components, set up other alarms or cameras (if needed), and do a factory reset.
A User-Friendly Security System Is The Right Choice
Figuring out how to reset a home security system in Birmingham can be a challenge if it isn’t equipped with user-friendly instructions and features. If the time has come to find your intuitive alarm system, contact (205) 203-0526 or submit the form below. Our specialists are happy to customize the ideal security system for your property.